InteliDrive DCU Industrial 3.4.0 Global Guide
20
R = Remote connection indication (connection to InteliMonitor is active)
L = Access lock indication
Record in Alarm list
State machine indication
Oil Pressure (MainScrAna1) indication
Coolant Temperature (MainScrAna2) indication
RPM indication
2.2 Controller configuration and monitoring
InteliDrive Install Suite is pack contains separate PC software tools related to ComAp products. The main
components are: DriveConfig (DC), InteliMonitor (IMON) and InteliDDE server.
DriveConfig and InteliMonitor is based on Windows Vista/Win7/Win8 or higher platform.
2.2.1 AirGate connection to the PC
This connection type is used for connection to controller (s), that are connected to the Internet, however they do
not have public and static IP address. The controllers connect by InteliBridge-NT module to the AirGate server
and cyclically ask whether there is a connection request from a client or not. On the other side the clients (only
ComAp PC applications – DriveConfig, InteliMonitor and WebSupervisor) connect to the AirGate server instead
of connecting directly to the controller. The server then creates a "tunnel" between the client and the controller.
To Next Page
Loading...
