ComAp InteliDrive DCU Industrial - 1.5 Backward compatibility

InteliDrive DCU Industrial 3.4.0 Global Guide
8
Revision number Related sw. version Date Author
6 3.4.0 25.6.2019 Lukáš Bečka
5 3.4.0 29.5.2019 Jan Kovacka
4 3.2.0 2.5.2019 Lukáš Bečka
3 3.2.0 26.4.2019 Lukáš Bečka
2 3.0.0 1.4.2019 Jan Kovačka
1 3.0.0 28.5.2018 Jan Kovačka
1.5 Backward compatibility
InteliDrive DCU Industrial has these backward compatiblity:
HW 1.0.1 and older are compatible with SW 3.3(W) and older
HW2.0.1 and newer are compatible with SW 3.4 and newer.
IMPORTANT: Compatibility across HW version is incompatible, you can transfer just PLC sheets.
FW upgrade functionality could not work on 100% and ComAp does not recommend it.