InteliDrive DCU Industrial 3.4.0 Global Guide
345
8.2.12 ID-COM
Description
InteliDrive Communication interface for proprietary and/or remote communication. The CAN1 line is used for
J1939 (ECU) bus connection or extension modules. The CAN2 line is used for inter-controller communication
and remote displays. There are 2 variants of the ID-COM module that differ in the interface in the middle of the
module. The standard version includes the RS485 interface for Modbus connection or remote display
connection. The special variant then offers the J1708/J1587 for a redundant communication link, especially in
conjunction with Volvo Penta engines. ID-COM is mounted directly to ID-DCU box. Heat radiation of this
module is 2 W.
Dimensions
Image 8.19 Dimensions of ID-COM
Image 8.20 Dimensions of ID-COM J1708
To Next Page
Loading...
