ComAp InteliDrive DCU Industrial - Page 344

InteliDrive DCU Industrial 3.4.0 Global Guide
344
Wiring
PWM output
PWM
output
1200 Hz
Current output 0 to 20
mA DC
Current
output 0 to
20 mA DC
Current output 0 to 20
mA DC
Current
output 0 to
20 mA DC
Voltage output 0 to 10 V
DC
Voltage
output 0 to
10 V DC
Image 8.18 Possible output modes
Technical data
Dimension (W × H × D) 95 × 96 × 43 mm (3.7’ × 3.8’ × 1.7’)
Interface to controller CAN
Output 8 analog, no galvanic separation
Type of analog output
0 to 10V DC ± 1 % , max 5 mA DC
0 to 20 mA DC ± 1 % , max 500 Ω
PWM 1200 Hz, 5V DC level, max 10 mA DC
Power supply 8 to 36 V DC
Analog output refreshment 320 ms
Current consumption max 300 mA (100 mA at 24 V)
RS232 interface TTL, firmware upgrade via AT-link.
Storage temperature - 40 °C to + 80 °C
Operating temperature - 30 °C to + 70 °C
Heat radiation 2.5 W
6 back to Extensional modules