To Next Page

To Previous Page

Appendix A Setting Jumpers

A.1 Warnings and Cautions ........................................................................ A-2

A.2 Remove Power from the System ........................................................... A-3

A.3 Open the System................................................................................... A-4

A.4 Remove the Floppy Disk Enclosure ...................................................... A-5

A.5 Set Jumpers .......................................................................................... A-6

A.6 Restore Power ....................................................................................... A-8

Examples

1–1 Power-Up Display ..................................................................................1-4

1–2 Booting Tru64 UNIX from a Local Disk ................................................1-6

1–3 Booting Tru64 UNIX from a Remote Disk .............................................1-8

1–4 Installing Tru64 UNIX.........................................................................1-10

1–5 Booting OpenVMS from a Local Disk ..................................................1-12

1–6 Booting OpenVMS from a Disk on a Cluster .......................................1-14

1–7 Booting OpenVMS from a Remote Disk...............................................1-16

1–8 Installing OpenVMS ............................................................................1-18

1–9 Starting LFU from the SRM Console...................................................1-26

1–10 Booting LFU from the CD-ROM ..........................................................1-27

1–11 Updating Firmware from the CD-ROM ...............................................1-28

1–12 Creating Update Diskettes on an OpenVMS System ..........................1-33

1–13 Updating Firmware from the Floppy Disk ..........................................1-34

1–14 Selecting

DS10FW to Update Firmware from Internal Floppy Disk....1-37

1–15 Updating Firmware from a Network Device........................................1-38

2–1 Show Config Command ..........................................................................2-8

2–2 Show Device Command........................................................................2-10

2–3 Show Memory Command .....................................................................2-12

2–4 Show PAL Command ...........................................................................2-12

2–5 Show Power Command ........................................................................2-13

2–6 Show Version Command ......................................................................2-14

2–7 Editing the nvram Script .....................................................................2-15

2–8 Clearing the nvram Script ...................................................................2-15

2–9 Boot Command.....................................................................................2-17

2–10 Prcache Command ...............................................................................2-18

2–11 Test Command .....................................................................................2-19

2–12 Set Password Command ......................................................................2-23

2–13 Set Secure Command ...........................................................................2-24

2–14 Secure Mode and Login Command ......................................................2-26

2–15 Clear Password Command...................................................................2-26

Compaq ALPHASERVER DS10 Reference Guide

Other manuals for Compaq ALPHASERVER DS10