Using the scanner, how do I …? 4-4
7. Once the thick original is loaded, the scanner will automatically leave the ATAC mode,
which means that the Paper Forward and Paper Reverse keys will return to their normal
functionality for moving the original forwards and backwards.
8. It is important to help support the thick original during scanning - both at the entrance side
and the exit side of the scanner.
9.
Pressure Platen in UP position - Press and hold the Pape
Forward key (arrow up) key to raise the pressure-platen.
About Thick Media Settings and Auto Adjustment
On scanners:
Scanner’s Auto-adjustment – only in the Normal position.
The scanner employs an automatic self-adjustment procedure (light profile, stitching etc.) that
can only auto-activate when the scanner is in the Normal position. With prolonged scanning in
extended thickness settings, you should from time to time return the scanner to its Normal
position to allow it to self-adjust. This will ensure refreshed self-adjustment and optimal
performance of your scanner. Make a habit of always setting the scanner in the Normal position
when shutting down, so it can auto-adjust the next time you turn it ON
NOTE:The scanner runs at its optimal speed in the Normal position. To allow stable drive
handling, scanning speed is automatically reduced when the scanner is in the extended
thickness positions.
To Next Page
Loading...
