Configuration and Setup 3-14
2 adjustable feet
Original position must be all the way up (shortest feet)
3 fixed feet
Physical placement of the scan station:
On Scanners:
Your wide format scanner should be placed either on the specially designed stand-alone floor
stand or on a sturdy table. Make sure there is enough space behind the scanner to allow the
media to run out. Thick stiff media naturally requires space that is at least as large as the media
length.
Physical placement of the scan station:
Guidelines that apply for all scanners:
Slots and openings in the cabinet at the back and bottom are provided for ventilation. This
ensures reliable operation of the product and protects it from overheating. These openings must
never be blocked or covered by placing the unit on a bed, sofa, rug, or other similar soft
surface.
Your scanner should never be placed near or over a radiator or heat register.
To Next Page
Loading...
