Material Description
Reagents
• Two reagents that are mixed in the microfluidic
m
ixer of the cartridge.
• If using dilution, a dilution solution.
See Section 9.2 Chemical resistance, on page 115 to
determine if the reagents are compatible for use with
the system.
Syringes One syringe for each reagent (up to three syringes).
Se
e Syringe compatibility, on page 112 for compatible
syringes.
Sample collection tube A collection tube that is large enough to hold the final
sample volume, and that is chemically compatible with
the reagents. See Collection tube compatibility,
on page 113 for compatible tubes.
Waste collection tube A collection tube that is large enough to hold the start
and end waste, and that is chemically compatible with
the reagents. See Collection tube compatibility,
on page 113 for compatible tubes.
6 Operation
6.
3 Run a procedure
6.3.2 Prerequisites and required materials
NanoAssemblr Ignite and Ignite+ Operating Instructions NIN1134 AA 82
To Next Page
Loading...
