D-Link DGS-3120-48PC - Line Editing Keys

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
6
when entering the command. DO NOT TYPE THE ANGLE
BRACKETS.
square brackets [ ]
Encloses a required value or list of required arguments. Only one
value or argument must be specified. For example, in the syntax
create account [admin | operator | power_user | user] <username
15> {encrypt [plain_text | sha_1] <password>}
users must specify either the admin-level or user-level account when
entering the command. DO NOT TYPE THE SQUARE BRACKETS.
vertical bar |
Separates mutually exclusive items in a list, one of which must be
entered. For example, in the syntax
create ipif <ipif_name 12> {<network_address>} <vlan_name 32>
{secondary | state [enable | disable] | proxy_arp [enable | disable]
{local [enable | disable]}}
users must specify either the community or trap receiver in the
command. DO NOT TYPE THE VERTICAL BAR.
braces { }
Encloses an optional value or a list of optional arguments. One or
more values or arguments can be specified. For example, in the syntax
reset {[config | system]} {force_agree}
users may choose configure or system in the command. DO NOT
TYPE THE BRACES.
parentheses ( )
Indicates at least one or more of the values or arguments in the
preceding syntax enclosed by braces must be specified. For example,
in the syntax
config bpdu_protection ports [<portlist> | all] {state [enable | disable] |
mode [drop | block | shutdown]}(1)
users have the option to specify hops or time or both of them. The "(1)"
following the set of braces indicates at least one argument or value
within the braces must be specified. DO NOT TYPE THE
PARENTHESES.
ipif <ipif_name 12>
metric <value 1-31>
12 means the maximum length of the IP interface name.
1-31 means the legal range of the metric value.
1-4 Line Editing Keys
Keys
Description
Delete Delete character under cursor and shift remainder of line to left.
Backspace
Delete character to left of cursor and shift remainder of line to left.
Insert
Toggle on and off. When toggled on, inserts text and shifts previous
text to right.
Left Arrow
Move cursor to left.
Right Arrow
Move cursor to right