xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
783
Appendix C System Log Entries
The following table lists all possible entries and their corresponding meanings that will appear in
the System Log of this Switch.
Category Event Description Log Information Severity Remark
[Unit <unitID>,] System started up
[Unit <unitID>,] System warm start
System cold start [Unit <unitID>,] System cold start Critical
[Unit <unitID>,] Configuration
saved to flash by
console(Username: <username>,
IP: <ipaddr> )
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.
System log saved to flash
[Unit <unitID>,] System log saved
to flash by console(Username:
<username>, IP: <ipaddr> )
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.
[Unit <unitID>,] Configuration and
log saved to flash by
console(Username: <username>,
IP: <ipaddr> )
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.
[Unit <unitID>,] Internal Power
[Unit <unitID>,] Internal Power is
Redundant Power failed [Unit <unitID>,] Redundant Power
failed
Critical
[Unit <unitID>,] Redundant Power
[Unit <unitID>,] Side Fan failed
[Unit <unitID>,]Side Fan recovered
[Unit <unitID>,] Firmware
upgraded by console successfully
(Username: <username>, IP:
<ipaddr>" are XOR
shown in log string,
which means if user