D-Link DGS-3120-48PC - Show Qinq

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
574
Example
To configure port list 1-4 as NNI port and set the TPID to 0x88A8:
DGS-3120-24TC:admin# config qinq ports 1:1-1:4 role nni outer_tpid 0x88A8
Command: config qinq ports 1:1-1:4 role nni outer_tpid 0x88A8
Success.
DGS-3120-24TC:admin#
61-5 show qinq
Description
This command is used to display the global QinQ status.
Format
show qinq
Parameters
None.
Restrictions
None.
Example
To display the global QinQ status:
DGS-3120-24TC:admin# show qinq
Command: show qinq
QinQ Status : Enabled
DGS-3120-24TC:admin#
61-6 show qinq inner_tpid
Description
This command is used to display the inner-TPID of a system.
Format
show qinq inner_tpid