xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
56
default - Specify that the default timeout value will be used.
retransmit - (Optional) The count for re-transmitting. The default value is 2.
<int 1-20> - Enter the re-transmit value here. This value must be between 1 and 20.
default - Specify that the default re-transmit value will be used.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure a radius server:
DGS-3120-24TC:admin# config radius 1 auth_port 60
Command: config radius 1 auth_port 60
Success.
DGS-3120-24TC:admin#
4-24 show radius
Description
This command is used to display RADIUS server configurations.
Format
show radius
Parameters
None.
Restrictions
None.
Example
To display RADIUS server configurations:
To Next Page
Loading...
