D-Link DGS-3120-48PC - Show Terminal Width; Config Ports

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
19
Restrictions
None.
Example
To configure the current terminal width:
DGS-3120-24TC:admin# config terminal width 120
Command: config terminal width 120
Success.
DGS-3120-24TC:admin#
2-16 show terminal width
Description
The command is used to display the configuration of current terminal width.
Format
show terminal width
Parameters
None.
Restrictions
None.
Example
To display the configuration of current terminal width:
DGS-3120-24TC:admin#show terminal width
Command: show terminal width
Global terminal width : 80
Current terminal width : 80
DGS-3120-24TC:admin#
2-17 config ports
Description
This commands is used to configure the Switch's port settings.