D-Link DGS-3120-48PC - Delete Syslog Host; Show Syslog Host

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
702
DGS-3120-24TC:admin#config syslog host all severity debug facility local0
Command: config syslog host all severity debug facility local0
Success.
DGS-3120-24TC:admin#
76-9 delete syslog host
Description
This command is used to delete the syslog host(s).
Format
delete syslog host [<index 1-4> | all]
Parameters
host - The host index or all hosts.
<index> - Enter the host index value here.
all - Specify that all the host indexes will be used.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete the specific syslog host:
DGS-3120-24TC:admin# delete syslog host 4
Command: delete syslog host 4
Success.
DGS-3120-24TC:admin#
76-10 show syslog host
Description
This command is used to display the syslog host configurations.
Format
show syslog host {<index 1-4>}
Parameters
host - The host index or all hosts.
<index> - (Optional) Enter the host index value here.