D-Link DGS-3120-48PC - Show Cfm Mipccm

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
199
Example
To delete the CFM link trace reply:
DGS-3120-24TC:admin# delete cfm linktrace mepname mep1
Command: delete cfm linktrace mepname mep1
Success.
DGS-3120-24TC:admin#
19-21 show cfm mipccm
Description
This command is used to show the MIP CCM database entries. All entries in the MIP CCM
database will be shown. A MIP CCM entry is similar to a FDB which keeps the forwarding port
information of a MAC entry.
Format
show cfm mipccm
Parameters
None.
Restrictions
None.
Example
To show MIP CCM database entries:
DGS-3120-24TC:admin# show cfm mipccm
Command: show cfm mipccm
MA VID MAC Address Port
---------- ---- ----------------- -----
opma 1 xx-xx-xx-xx-xx-xx 2
opma 1 xx-xx-xx-xx-xx-xx 3
Total: 2
DGS-3120-24TC:admin#
19-22 config cfm mp_ltr_all
Description
This command is used to enable or disable the "all MPs reply LTRs" function.