D-Link DGS-3120-48PC - Chapter 89 Password Recovery Command List

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
772
Chapter 89 Password Recovery
Command List
enable password_recovery
disable password_recovery
show password_recovery
89-1 enable password_recovery
Description
This command is used to enable the password recovery mode.
Format
enable password_recovery
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable the password recovery mode:
DGS-3120-24TC:admin# enable password_recovery
Command: enable password_recovery
Success.
DGS-3120-24TC:admin#
89-2 disable password_recovery
Description
This command is used to disable the password recovery mode.
Format
disable password_recovery