D-Link DGS-3120-48PC - Chapter 10 Asymmetric VLAN Command List

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
131
Chapter 10 Asymmetric VLAN
Command List
enable asymmetric_vlan
disable asymmetric_vlan
show asymmetric_vlan
10-1 enable asymmetric_vlan
Description
This command is used to enable the asymmetric VLAN function on the Switch.
Format
enable asymmetric_vlan
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable asymmetric VLANs:
DGS-3120-24TC:admin# enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
DGS-3120-24TC:admin#
10-2 disable asymmetric_vlan
Description
This command is used to disable the asymmetric VLAN function on the Switch.
Format
disable asymmetric_vlan