D-Link DGS-3120-48PC - Enable Telnet; Disable Telnet

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
140
12-6 enable telnet
Description
This command is used to manage the Switch via TELNET based management software. Use the
command to enable TELNET and configure port number.
Format
enable telnet {<tcp_port_number 1-65535>}
Parameters
<tcp_port_number 1-65535> - (Optional) The TCP port number. TCP ports are numbered
between 1 and 65535. The “well-known” TCP port for the TELNET protocol is 23.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable TELNET and configure port number:
DGS-3120-24TC:admin# enable telnet 23
Command: enable telnet 23
Success.
DGS-3120-24TC:admin#
12-7 disable telnet
Description
This command is used to manage the Switch via TELNET based management software. Use the
command to disable TELNET.
Format
disable telnet
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.