D-Link DGS-3120-48PC - Show Authen Application

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
74
enable - Select the method list of authentication methods for promoting user's privilege to Admin
level.
default - Default method list.
method_list_name - The user-defined method list name.
<string> - Enter the method list name here. This value can be up to 15 characters long.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the login method list for telnet:
DGS-3120-24TC:admin# config authen application telnet login method_list_name
login_list_1
Command: config authen application telnet login method_list_name login_list_1
Success.
DGS-3120-24TC:admin#
5-15 show authen application
Description
This command is used to display the login/enable method list for all applications.
Format
show authen application
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display the login/enable method list for all applications: