D-Link DGS-3120-48PC - Chapter 31 Flash File System (FFS) Command List

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
288
Chapter 31 Flash File System (FFS)
Command List
show storage_media_info {[unit <unit_id> | all]}
change drive {unit <unit_id>} <drive_id>
md {{unit <unit_id>} <drive_id>} <pathname>
rd {{unit <unit_id>} <drive_id>} <pathname>
cd {<pathname>}
dir {{unit <unit_id>} <drive_id>} {<pathname>}
rename {{unit <unit_id>} <drive_id>} <pathname> <filename>
del {{unit <unit_id>} <drive_id>} <pathname> {recursive}
erase {{unit <unit_id>} <drive_id>} <pathname>
move {{unit <unit_id>} <drive_id>} <pathname> {{unit <unit_id>} <drive_id>} <pathname>
copy {{unit <unit_id>} <drive_id>} <pathname> {{unit <unit_id>} <drive_id>} <pathname>
format {unit <unit_id>} <drive_id> {[fat16 | fat32]} {<label_name>}
31-1 show storage_media_info
Description
This command is used to display the information of the storage media available on the system.
There can be one or multiple media on the system. The information for a media includes the drive
number, the media identification.
Format
show storage_media_info {[unit <unit_id> | all]}
Parameters
unit - (Optional) Specify a unit ID if in the stacking system. If not specified, it refers to the master
unit.
<unit_id> - Enter the unit ID here.
all - Specify all units.
Restrictions
None.
Example
To display the storage media’s information: