D-Link DGS-3120-48PC - Show Jwac; Enable Jwac Redirect

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
375
37-4 show jwac
Description
This command is used to display the JWAC configuration settings.
Format
show jwac
Parameters
None.
Restrictions
None.
Example
To display the current JWAC configuration:
DGS-3120-24TC:admin#show jwac
Command: show jwac
State : Disabled
Enabled Ports :
Virtual IP/URL : 0.0.0.0/-
Virtual IPv6/URL : ::/-
Switch HTTP Port : 80 (HTTP)
UDP Filtering : Enabled
Forcible Logout : Enabled
Redirect State : Enabled
Redirect Delay Time : 1 Seconds
Redirect Destination : Quarantine Server
Quarantine Server :
Quarantine Server IPv6 :
Q-Server Monitor : Disabled
Q-Server Error Timeout : 30 Seconds
RADIUS Auth-Protocol : PAP
RADIUS Authorization : Enabled
Local Authorization : Enabled
Function Version : 2.11
DGS-3120-24TC:admin#
37-5 enable jwac redirect
Description
This command is used to enable JWAC redirect. When redirect quarantine_server is enabled,
the unauthenticated host will be redirected to a quarantine server when it tries to access a random