xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
21
DGS-3120-24TC:admin#config ports all medium_type copper speed auto
Command: config ports all medium_type copper speed auto
Success.
2-18 show ports
Description
This command is used to display the current configurations of a range of ports.
Format
show ports {<portlist>} {[description | err_disabled | details | media_type]}
Parameters
ports - Specify a range of ports to be displayed.
<portlist> - (Optional) Enter the list of ports to be configured here.
description - (Optional) Indicates if port description will be included in the display .
err_disabled - (Optional) Indicates if ports are disabled by some reasons will be displayed.
details - (Optional) Displays the port details.
- (Optional) Displays port transceiver type.
Restrictions
None.
Example
To display the port details:
To Next Page
Loading...
