xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
166
Example
This example displays the guest VLAN setting:
DGS-3120-24TC:admin# show authentication guest_vlan
Command: show authentication guest_vlan
Guest VLAN VID : 1:1
Guest VLAN Member Ports : 1:4
Guest VLAN VID : 1:3
Guest VLAN Member Ports : 1:1,1:8
Total Entries: 2
16-6 show authentication ports
Description
This command is used to display authentication setting on port(s).
Format
show authentica
tion ports {<portli
st>}
Parameters
<portlist> - Enter a list of ports to be displayed.
If not specify the port list, displays compound authentication setting of all ports.
Restrictions
None.
Example
This example displays authentication setting for all ports:
To Next Page
Loading...
