xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
523
DGS-3120-24TC:admin#show utilization cpu
Command: show utilization cpu
CPU Utilization
-------------------------------------------------------------------------------
Five seconds - 10 % One minute - 10 % Five minutes - 10 %
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
52-4 show utilization dram
Description
This command is used to show DRAM memory utilization.
Format
show utilization dram {unit <unit_id>}
Parameters
unit - (Optional) Specify the Switch unit ID to be displayed.
<unit_id> - Enter teh Switch unit ID used here.
Restrictions
None.
Example
To display DRAM utilization:
To Next Page
Loading...
