D-Link DGS-3120-48PC - Show Mirror

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
467
Example
To disable mirroring function:
DGS-3120-24TC:admin# disable mirror
Command: disable mirror
Success.
DGS-3120-24TC:admin#
46-4 show mirror
Description
This command is used to display the current mirror function state and mirror session configuration
on the Switch.
Format
show mirror
Parameters
None.
Restrictions
None.
Example
To display mirroring configuration:
DGS-3120-24TC:admin# show mirror
Command: show mirror
Current Settings
Mirror Status: Disabled
Target Port : 2:1
Mirrored Port
RX: 1:1
TX: 1:1
DGS-3120-24TC:admin#