D-Link DGS-3120-48PC - Page 107

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
103
Example
To display the current time range settings:
DGS-3120-24TC:admin# show time_range
Command: show time_range
Time Range Information
-----------------------------
Range Name : test
Weekdays : Sun,Tue
Start Time : 11:00:00
End Time : 12:00:00
Associated ACL Entries : 2-10, 3-8
DGS-3120-24TC:admin#
6-9 show current_config access_profile
Description
This command is used to display the ACL part of the current configuration, when logged in with
user level privileges.
The overall current configuration can be displayed by using the show config command, which is
accessible with administrator level privileges.
Format
show current_config access_profile
Parameters
None.
Restrictions
None.
Example
To display the ACL part of the current configuration: