xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
115
DGS-3120-24TC:admin#show egress_access_profile profile_id 1
Command: show egress_access_profile profile_id 1
Egress Access Profile Table
================================================================================
Profile ID: 1 Profile name: EthernetACL Type: Ethernet
MASK on
VLAN : 0xFFF
802.1p
Available HW Entries : 127
--------------------------------------------------------------------------------
Rule ID : 1 (auto assign) Ports: 1:1
Match on
802.1p : 0
Action:
Permit
================================================================================
7-5 show current_config egress_access_profile
Description
This command is used to display the egress ACL part of current configuration in user level of
privilege.
The overall current configuration can be displayed by “show config” command which is accessible
in administrator level of privilege.
Format
show current_config egress_access_profile
Parameters
None.
Restrictions
None.
Example
To display current configuration of egress access list table:
To Next Page
Loading...
