xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
264
DGS-3120-24TC:admin#config duld ports 1 state enable
Command: config duld ports 1:1 state enable
Success.
27-2 show duld ports
Description
This command is used to show unidirectional link detection information.
Format
show duld ports {
<portlist>}
Parameters
<portlist> - (Optional) Specify a range of ports.
Restrictions
None.
Example
To show ports 1-4 unidirectional link detection information:
DGS-3120-24TC:admin#show duld ports 1:1-1:4
Command: show duld ports 1:1-1:4
Port Admin State Oper Status Mode Link Status Discovery Time(Sec)
----- ----------- ----------- -------- -------------- -------------------
1:1 Enabled Disabled Normal Unknown 5
1:2 Disabled Disabled Normal Unknown 5
1:3 Disabled Disabled Normal Unknown 5
1:4 Disabled Disabled Normal Unknown 5
To Next Page
Loading...
