D-Link DGS-3120-48PC - Page 290

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
286
DGS-3120-24TC:admin#show fdb
Command: show fdb
Unicast MAC Address Aging Time = 300
VID VLAN Name MAC Address Port Type Status
---- -------------------------------- ----------------- ----- ------- -------
1 default 00-01-02-03-04-00 CPU Self Forward
1 default 00-23-7D-BC-08-44 1:1 Dynamic Forward
1 default 00-23-7D-BC-2E-18 1:1 Dynamic Forward
1 default 00-26-5A-AE-CA-1C 1:1 Dynamic Forward
1 default 60-33-4B-C4-52-1A 1:1 Dynamic Forward
Total Entries: 5
DGS-3120-24TC:admin#
To display the security FDB table:
DGS-3120-24TC:admin# show fdb security
Command: show fdb security
VID MAC Address Port Type Status Security Module
---- ---------------- ----- ------- -------- ---------------
1 00-00-00-10-00-01 1:1 Dynamic Drop 802.1X
1 00-00-00-10-00-02 1:2 Static Forward WAC
1 00-00-00-10-00-04 1:4 Static Forward Port Security
1 00-00-00-10-00-0A 1:5 Static Forward MAC-based Access Control
1 00-00-00-10-00-06 1:6 Dynamic Drop Compound Authentication
Total Entries: 5
DGS-3120-24TC:admin#
30-11 show multicast vlan_filtering_mode
Description
This command is used to show the multicast packet filtering mode for VLANs.
Note: A product supports the multicast VLAN filtering mode could not support the port filtering
mode at the same time.
Format
show multicast vlan_filtering_mode {[ vlanid < vidlist> | vlan <vlan_name 32>]}
Parameters
vlanid - (Optional) Specify a list of VLANs to be configured.
<vidlist> - Enter the VLAN ID list here.
vlan - (Optional) Specify the name of the VLAN. The maximum name length is 32.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters