D-Link DGS-3120-48PC - Page 363

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
359
Example
To show the DHCP snooping state:
DGS-3120-24TC:admin# show address_binding dhcp_snoop
Command: show address_binding dhcp_snoop
DHCP_Snoop : Disabled
DGS-3120-24TC:admin#
To display DHCP snooping maximun entry configuration:
DGS-3120-24TC:admin# show address_binding dhcp_snoop max_entry
Command: show address_binding dhcp_snoop max_entry
Port Max Entry
---- ---------
1:1 No Limit
1:2 No Limit
1:3 No Limit
1:4 No Limit
1:5 No Limit
1:6 No Limit
1:7 No Limit
1:8 No Limit
1:9 No Limit
1:10 No Limit
1:11 No Limit
1:12 No Limit
1:13 No Limit
1:14 No Limit
1:15 No Limit
1:16 No Limit
1:17 No Limit
1:18 No Limit
1:19 No Limit
1:20 No Limit
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
34-13 show address_binding dhcp_snoop binding_entry
Description
This command is used to display the DHCP snooping binding entries.
Format
show address_binding dhcp_snoop binding_entry {port <port>}
Parameters
port – (Optional) Specify the port used for this configuration.