D-Link DGS-3120-48PC - Page 461

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
457
DGS-3120-24TC:admin# config mac_based_access_control authorization attributes
local disable
Command: config mac_based_access_control authorization attributes local disable
Success.
DGS-3120-24TC:admin#
44-14 show mac_based_access_control
Description
This command is used to display the MAC-based Access Control setting.
Format
show mac_based_access_control {ports {<portlist>}}
Parameters
ports – (Optional) Displays the MAC-based Access Control settings for a specific port or range of
ports.
<portlist> - (Optional) Enter the list of port used for this configuration here.
If no parameter is specified, the global MAC-based Access Control settings will be displayed.
Restrictions
None.
Example
To show the MAC-based Access Control port configuration for ports 1 to 4:
DGS-3120-24TC:admin#show mac_based_access_control ports 1:1-1:4
Command: show mac_based_access_control ports 1:1-1:4
Port State Aging Time Block Time Auth Mode Max User
(min) (sec)
----- -------- ---------- --------- ---------- --------
1:1 Disabled 1440 300 Host-based 128
1:2 Disabled 1440 300 Host-based 128
1:3 Disabled 1440 300 Host-based 128
1:4 Disabled 1440 300 Host-based 128
DGS-3120-24TC:admin#
44-15 show mac_based_access_control_local
Description
This command is used to display the MAC-based Access Control local database entry(s).