D-Link DGS-3120-48PC - Page 464

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
460
DGS-3120-24TC:admin# config mac_based_access_control max_users 128
Command: config mac_based_access_control max_users 128
Success.
DGS-3120-24TC:admin#
44-18 config mac_based_access_control trap state
Description
This command is used to enable or disable sending of MAC-based Access Control traps.
Format
config mac_based_access_control trap state [enable | disable]
Parameters
enable - Enable trap for MAC-based Access Control. The trap of MAC-based Access Control will
be sent out.
disable - Disable trap for MAC-based Access Control.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable trap state of MAC-based Access Control:
DGS-3120-24TC:admin# config mac_based_access_control trap state enable
Command: config mac_based_access_control trap state enable
Success.
DGS-3120-24TC:admin#
44-19 config mac_based_access_control log state
Description
This command is used to enable or disable generating of MAC-based Access Control logs.
Format
config mac_based_access_control log state [enable | disable]
Parameters
enable - Enable log for MAC-based Access Control. The log of MAC-based Access Control will
be generated.