D-Link DGS-3120-48PC - Page 558

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
554
Format
show poe ports {<portlist>}
Parameters
<portlist> - (Optional) Specified a list of ports to be displayed.
If no parameter specified, the system will display the status for all ports.
Restrictions
None.
Example
To display PoE port:
DGS-3120-24PC:admin#show poe ports 1:1-1:6
Command: show poe ports 1:1-1:6
Port State Priority Power Limit(mW) Time Range
Class Power(mW) Voltage(decivolt) Current(mA)
Status
===============================================================================
1:1 Enabled Low 15400(User-defined)
0 0 0 0
OFF : Interim state during line detection
1:2 Enabled Low 15400(User-defined)
0 0 0 0
OFF : Interim state during line detection
1:3 Enabled Low 15400(User-defined)
0 0 0 0
OFF : Interim state during line detection
1:4 Enabled Low 15400(User-defined)
0 0 0 0
OFF : Interim state during line detection
1:5 Enabled Low 15400(User-defined)
0 0 0 0
OFF : Interim state during line detection
1:6 Enabled Low 15400(User-defined)
0 0 0 0
OFF : Interim state during line detection
DGS-3120-24PC:admin#