D-Link DGS-3120-48PC - Page 63

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
59
DGS-3120-24TC:admin#show auth_diagnostics ports 1:1
Command: show auth_diagnostics ports 1:1
Port Number : 1:1
EntersConnecting 11
EapLogoffsWhileConnecting 0
EntersAuthenticating 0
SuccessWhileAuthenticating 0
TimeoutsWhileAuthenticating 0
FailWhileAuthenticating 0
ReauthsWhileAuthenticating 0
EapStartsWhileAuthenticating 0
EapLogoffWhileAuthenticating 0
ReauthsWhileAuthenticated 0
EapStartsWhileAuthenticated 0
EapLogoffWhileAuthenticated 0
BackendResponses 0
BackendAccessChallenges 0
BackendOtherRequestsToSupplicant 0
BackendNonNakResponsesFromSupplicant 0
BackendAuthSuccesses 0
BackendAuthFails 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
4-27 show auth_session_statistics
Description
This command is used to display information of authenticator session statistics.
Format
show auth_session_statistics {ports <portlist>}
Parameters
ports - (Optional) Specify a range of ports to be displayed.
<portlist> - Enter the list of ports that will be displayed here.
Restrictions
None.
Example
To display authenticator session statistics information for port 1: