xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
739
Restrictions
None.
Example
To display network address forwarding table:
DGS-3120-24TC:admin# show ipfdb
Command: show ipfdb
Interface IP Address Port Learned
------------ --------------- ------ ---------
System 10.1.1.101 1:3 Dynamic
System 10.1.40.22 1:3 Dynamic
System 10.2.27.250 1:3 Dynamic
Total Entries: 3
85-5 show route preference (EI Mode Only)
Description
This command is used to display the route preference setting.
Format
show route preference {[local | static | default]}
Parameters
local - (Optional) Display the preference of local route.
static - (Optional) Display the preference of static route.
default - (Optional) Display the preference of default route.
Restrictions
None.
Example
To display the route preference for all route types:
To Next Page
Loading...
