xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
72
Example
To configure a user-defined method list for promoting user's privilege to Admin level:
DGS-3120-24TC:admin# config authen_enable method_list_name enable_list_1 method
tacacs+ tac
acs local_enable
Command: config authen_ enable method_list_name enable_list_1 method tacacs+
tacac
s local_enable
Success.
5-12 delete authen_enable
Description
This command is used to delete a user-defined method list of authentication methods for
promoting user's privilege to Admin level.
Format
delete authen_enable method_list_name <string 15>
Parameters
<string 15> - The user-defined method list name. This value can be up to 15 characters long.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete a user-defined method list for promoting user's privilege to Admin level:
DGS-3120-24TC:admin# delete authen_enable method_list_name enable_list_1
Command: delete authen_enable method_list_name enable_list_1
Success.
5-13 show authen_enable
Description
This command is used to display the method list of authentication methods for promoting user's
privilege to Admin level.
To Next Page
Loading...
