D-Link DGS-3120-48PC - Page 806

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
802
swPowerStatusChg
Power Status change notification.
Binding
1. swPowerUnitIndex
2. swPowerID
3. swPowerStatus
1.3.6.1.4.1.171.12.11.2.2.2.0.1
swPowerFailure
Power Failure notification.
Binding
1. swPowerUnitIndex
2. swPowerID
3. swPowerStatus
1.3.6.1.4.1.171.12.11.2.2.2.0.2
swPowerRecover
Power Recover notification.
Binding
1. swPowerUnitIndex
2. swPowerID
3. swPowerStatus
1.3.6.1.4.1.171.12.11.2.2.2.0.3
swUnitInsert
Unit Hot Insert notification.
Binding
1. swUnitMgmtId
2. swUnitMgmtMacAddr
1.3.6.1.4.1.171.12.11.2.2.1.0.1
swUnitRemove
Unit Hot Remove notification.
Binding
1. swUnitMgmtId
2. swUnitMgmtMacAddr
1.3.6.1.4.1.171.12.11.2.2.1.0.2
swUnitFailure
Unit Failure notification.
Binding
1. swUnitMgmtId
1.3.6.1.4.1.171.12.11.2.2.1.0.3
swUnitTPChange
The stacking topology change
notification.
Binding
1. swStackTopologyType
2. swUnitMgmtId
3. swUnitMgmtMacAddr
1.3.6.1.4.1.171.12.11.2.2.1.0.4
swUnitRoleChange
The stacking unit role change
notification.
Binding
1. swStackRoleChangeType
2. swUnitMgmtId
1.3.6.1.4.1.171.12.11.2.2.1.0.5
lldpRemTablesChange
A lldpRemTablesChange
notification is sent when the value of
lldpStatsRemTableLastChangeTime
changes. It can be utilized by an
NMS to trigger LLDP remote
systems table maintenance polls.
Binding
1. lldpStatsRemTablesInserts
2. lldpStatsRemTablesDeletes
3. lldpStatsRemTablesDrops
4. lldpStatsRemTablesAgeouts
1.0.8802.1.1.2.0.0.1
lldpXMedTopologyChangeDetected
A notification generated by the local
device sensing a change in the
topology that indicates that a new
remote device attached to a local
port, or a remote device
disconnected or moved from one
port to another.
Binding
1.0.8802.1.1.2.1.5.4795.0.1