D-Link DGS-3120-48PC - Page 98

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
94
Format
show access_profile {[profile_id <value 1-6> | profile_name <name 1-32>]}
Parameters
profile_id - (Optional) Specify the index of the access list profile.
<value 1-6> - Enter the profile ID used here. This value must be between 1 and 6.
profile_name - (Optional) Specify the name of the profile.
<name 1-32> - Enter the profile name used here. This name can be up to 32 characters long.
Restrictions
None.
Example
To display the current access list table:
DGS-3120-24TC:admin#show access_profile
Command: show access_profile
Access Profile Table
Total User Set Rule Entries : 4
Total Used HW Entries : 5
Total Available HW Entries : 1531
==============================================================================
Profile ID: 1 Profile name: EtherACL Type: Ethernet
MASK on
VLAN : 0xFFF
802.1p
Ethernet Type
Available HW Entries : 255
------------------------------------------------------------------------------
Rule ID : 1 Ports: 1:1
Match on
VLAN ID : 1
802.1p : 0
Ethernet Type : 0xFFFE
Action:
Permit
==============================================================================
==============================================================================