D-Link DWC-2000 User Manual 113
Section 4 - Advanced WLAN Conguration
AP Firmware Status
Status (per-AP)
A table also appears and lists each AP, its download status, and the software version it
is downloading. The status for an individual AP can have one of the following values:
• Requested: A download is planned for this AP, but the AP is not in the current
download group, so it hasn’t been told to start the download yet.
• Code‐Transfer‐In‐Progress: The AP has been told to download the code.
• Failure: The AP reported a failing code download.
• Aborted: The download was aborted before the AP loaded code from the TFTP
server.
• Waiting‐For‐APs‐To‐Download: A download nished on this AP, and it is waiting
for other APs to nish download. Reset command is not sent to the AP in this
state.
• NVRAM‐Update‐In‐Progress: Download completed successfully. The reset
command sent to the AP.
• Timed‐Out: The AP did not reconnect to the controller in the xed time interval.
AP MAC The managed AP MAC address.
Location The location of the managed AP.
Status Refer to Status (per-AP) above.
Firmware Version The current rmware version of the managed AP.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
