D-Link DWC-2000 User Manual 58
Section 3 - Basic Conguration
6. Create device MAC authentication database on local database.
a. Go to Security > Authentication > User Database > MAC Authentication tab.
b. Next to List Type, the current type is displayed. To change the setting, refer to “Step #5: Select
MAC Authentication Mode” on page 34.
c. Click Add New MAC Authentication. Enter the MAC address of the device and a name.
d. Click Save.
Note: If the user authentication and MAC authentication database is external authentication server
(i.e., RADIUS), please refer to “Step #8: Use SSID with RADIUS Sever as Authenticator” on page 45.
7. Discover and manage an access point from the network. Please refer to “Step #3: Select APs to be
Managed” on page 27.
To Next Page
Loading...
