DataCard SD Series

SD Series Card Printers User’s Guide 29
5.
Replacetheprintribboncartridge.Avoid
bumpingtheprintheadwhenyouinstalltheprint
ribboncartridge.
6. Closetheprintercover.Pressdownontheridges
onthefrontofthe covertomakesurethatit
latchesproperlyonbothsides.
7. Powerontheprinter.
8. Printasamplecardtoverifythequalityof
printing.Referto“PrintaTestCard”onpage18
formoreinformation.
HINTS&TIPS
• Avoidtouchingtheprintheadedgewithyourfingers.Contamination dueto
skinoilseventuallycandamagetheprinthead.
• Avoidtouchingtheprintingedgeoftheprintheadcartridgewithanysharp
objectsthatcanpermanentlydamagetheprinthead.
• Useonlythecleaningswabtocleantheprinthead.Othermaterialscanstick
totheprintheadandcausedamage.
• Useacleaningswabonetimeonly.Discarditafteryoucleantheprinthead.