DataCard SD Series - 197: Laminator Entry Card Problem; 198: L1 Area Card Problem; 199: L2 Area Card Problem; 200: Laminator Exit Card Problem

SD Series Card Printers User’s Guide 71
197: Laminator entry card problem
Thecardisnotwhereitshouldbeinthelaminator.
1. Openthelaminator.
2. Turntheknobtoremovethecard.
3. Closethelaminator.
198: L1 area card problem
Thecardisnotwhereitshouldbeinthelaminator.
1. OpenthelaminatorandremovetheL1supplycartridge.
2. Turntheknobtoremovethecard.
3. Replacethesupplycartridgeandclosethelaminator.
199: L2 area card problem
Thecardisnotwhereitshouldbeinthelaminator.
1. OpenthelaminatorandremovetheL2supplycartridge.
2. Turntheknobtoremovethecard.
3. Replacethesupplycartridgeandclosethelaminator.
200: Laminator exit card problem
Thecardisnotwhereitshouldbeinthelaminator.
1. Openthelaminator.
2. Turntheknobtoremovethecard.
3. Closethelaminator.
201: L1 supply problem
TheL1supplyisnotmovingproperly.Totryanothercard:
1. OpenthelaminatorandremovetheL1cartridge.
2. Reposition,repair,orreplacethesupplyandadvancetherepairedareaone
fullturn.
3. Replacethecartridgeandclosethelaminator.