DataCard SD Series - 118: Print Ribbon Type Problem; 119: Print Ribbon Not Supported; 120: User Paused the Printer

SD Series Card Printers User’s Guide 67
118: Print ribbon type problem
Theprintercannotusetheribboninstalled.Thecardwillbecanceled.
Useribbondesignedforthisprinter.
PresstheUSERbuttonontheprinter,orclickOKinthemessageboxtoclearthe
message.
HINTS&TIPS
• Purchaseribbonfromyourdealerorauthorizedreseller.
• ChecktheDatacardwebsitefornewerfirmwarethatsupportsnewribbon
types.
119: Print ribbon not supported
Theprintercannotusetheribboninstalled.Thecardwillbecanceled.
Useribbondesignedforthisprinter.
PresstheUSERbuttonontheprinter,orclickOKinthemessageboxtoclearthe
message.
HINTS&TIPS
• Purchaseribbonfromyourdealerorauthorizedreseller.
• ChecktheDatacardwebsitefornewerfirmwarethatsupportsnewribbon
types.
120: User paused the printer
Theprinterwaspausedwhileprinting.
Tocompletethecurrentcardpresstheprinter’sU
SERbutton.
Inthemessagebox,clickOKtoclearthemessageandcompletethecurrentcard,
orclickCanceltocancelthecard.
H
INTS&TIPS
• IftheuserpressedtheUSERbuttonforseveralseconds,thecardhasbeen
canceled.
• Ifthismessageoccursoften,askyoursystemadministratortosetthebutton
sensitivitytoalowervalue.