DataCard SD Series

SD Series Card Printers User’s Guide 63
106: Magstripe data not found
Theprinterdidnotfindmagneticstripedataoncard.
1. Makesurethatyouareusingmagneticstripecardsthatmatchtheprinter
settings.
2. Makesurethatthecardsareplacedintheprintercorrectly.
PresstheUSERbuttonontheprinter.Inthemessagebox,clickRetry,orclick
Canceltocancelthecard.
HINTS&TIPS
• Thecardmightnotmatchprintersettingsorthedatasent.
• Askthesystemadministratortoverifythatthecard,thedata,andtheprinter
settingsmatch.
107: Magstripe read data error
Theprinterfailedtoreadthemagneticstripedatafromthecard.Thecardwill
becanceled.
1. Makesurethatyouareusingmagneticstripecardsthatmatchtheprinter
settings.
2. Makesurethatthecardsareplacedintheprintercorrectly.
PresstheUSERbuttonontheprinter,orclickOKinthemessageboxtoclearthe
message.
HINTS&TIPS
• Thedatamightuseadifferentformatthanthecurrentprintersetting.
• Askthesystemadministratortoverifythatthecard,data,andprintersettings
match.