DataCard SD Series

70 Troubleshooting
171: Insert same card side 1 up
1. Takethe cardfromtheprinterandturnitoverendtoendsoside1isfacing
up.
2. Insertthecardintheprinter.
3. Ifthecardisnotimmediatelypicked,presstheprinter’sUSERbuttonor
clickOK.
ClickCancelinthemessageboxifyouwanttocancelthecard.
172: Insert cleaning card
1. Insertcleaningcard.
2. Ifthecardisnotimmediatelypicked,presstheprinter’sUSERbuttonor
clickOK.
ClickCancelinthemessageboxifyouwanttocancelthecleaningcard.
173: Improper shutdown
Alwaysusethepowerbuttontopowerofftheprinter.
ClickOKinthemessageboxtoclearthemessage.
Laminator Messages
ThefollowingmessagesdisplayontheprinterLCDpanelwhenyouareusingan
SD460laminatingsystem.Theyalsodisplayinamessageboxonthe PCthat
issuedthecardprintjob.
177: Laminator not available
Theprinterandlaminatorcannotcommunicate.Thecardwill becanceled.
1. Makesurethedatacablefromthelaminatortotheprinte rissecurely
pluggedin.
2. PresstheprinterPowerbuttontopoweroffthesystem.
3. PressthePowerbuttonagaintopoweronthesystem.
196: Laminator error critical
Thelaminatorhasencounteredacriticalerror.Thecardwill becanceled.
1. PresstheprinterPowerbuttontopoweroffthesystem.
2. Requestservice.Thesystemmustremainpoweredoff.