DataCard SD Series

SD Series Card Printers User’s Guide 75
221: Bar code scanner problem
1. OpenthelaminatorandremovetheL1cartridge.
2. Verifythesupplyhasbarcodesprintedonit.
3. Replacethecartridgeandclosethelaminator.
4. Trythecardagain.
5. Iftheproblemoccursagain,requestservice.
222: Firmware version mismatch
Theprinterandlaminatorfirmwareversionsarenotcompatible.Thesystem
cannotlaminatecardsuntilthefirmwarehasbeenupdated.
Updateboththeprinterandlaminatortothelatestfirmwareversions.
223: Laminator system mismatch
Theprinterandlaminatorarenotcompatible.
Thelaminatorisnotsupportedbyyourprintermodel.Contactyourservice
providerforthecorrectlaminatormodel.