DataCard SD Series - 103: Printer Problem; 104: Critical Problem; 105: Magstripe Data Error

62 Troubleshooting
103: Printer problem
Theprinterhadanerror.Thecardwillbecanceled.
1. PresstheprinterPOWERbuttontopowerofftheprinter.
2. PressthePOWERbuttonag aintopowerontheprinter.
ClickOKinthemessageboxtoclearthemessage.
104: Critical problem
Theprinterhadaseriouserror.Thecardwillbecanceled.
1. PresstheprinterPOWERbuttontopowerofftheprinter.
2. Requestservice.
Thesystemmustremainpoweredoff.
ClickOKinthemessageboxtoclearthemessage.
105: Magstripe data error
Theprinterfailedtoverifythatthecorrectmagneticstripedatawaswrittenon
thecard.
1. Makesurethatyouareusingmagneticstripecardsthatmatchtheprinter
settings.
2. Makesurethatthecardsareplacedintheprintercorrectly.
PresstheUSERbuttonontheprinter.Inthemessagebox,clickRetry,orclick
Canceltocancelthecard.
H
INTS&TIPS
• Thecardmighthavebeenturnedthewrongway.
• Thecardmightnothaveamagneticstripe.