DataCard SD Series User Manual

A-8 SD460 Laminating System
Load Laminator Overlay Material
Loadtheoverlaymaterialinonelaminatorcartridgeatatime.
1. Openthelaminatoraccessdoor.
2. RemovetheL1(green)laminator
cartridgefromthelaminator.Place
thecartridgeonasmoothlevel
surfaceforloading.
3. Pushthereleaselatch(a)andopen
thegateonthelaminatorcartridge(b).
4. Removebothusedspoolsfromthecartridge(ifpresent).
TheL1(green)andL2(orange)cartridgesfitonlyintheirassignedlocations
insidethelaminator.Theyarenotinterchangeable.

DataCard SD Series Specifications

General

Brand	DataCard
Model	SD Series
Category	Printer
Language	English