DataCard SD Series User Manual

SD Series Card Printers User’s Guide 61
Respond to Messages
Youcanrespondtoprintermessagesusingtheprinterfrontpanelbuttonsorby
clickingtheappropriateresponseinthemessageboxdisplayedbytheCard
PrinterDriveronthePC.
Printer Messages
ThefollowingmessagesdisplayontheprinterLCDpanelandinamessageboxon
thePCthatissuedthecardprintjobwhenyouusetheCardPrinterDriver.
100: Request not supported
Theprinterdoesnotsupportthepersonalizationbeingrequestedforthecard.
Thecardwi ll becanceled.
Changethecarddatatomatchtheprinter’soptionsandsettings,orprinttoa
printerthatisconfiguredtosupportthepersonalizationbeingrequested.
PresstheUSERbuttonontheprinter,orclickOKinthemessageboxtoclearthe
message.
101: Job could not complete
Thecardtooktoomuchtimetocomplete.
Thecardwi ll becanceled.
PresstheUSERbuttonontheprinter,orclickOKinthemessageboxtoclearthe
message.
102: Card not in position
Thecardisnotpositionedintheprintercorrectly.
1. Opentheprinterandremovetheribboncartridge.
2. Turntheknobtoremovethecard.
3. Replacetheribboncartridgeandclosetheprinter.
PresstheUSERbuttonontheprinter.Inthemessagebox,clickRetry,orclick
Canceltocancelthecard.

DataCard SD Series Specifications

General

Brand	DataCard
Model	SD Series
Category	Printer
Language	English