Datalogic DS2400N User Manual

RAPID CONFIGURATION
1
Alternative Layouts
• The ID-NET™ is a built-in high-speed interface dedicated for high-speed
scanner interconnection. ID-NET™ is in addition to the Main and Auxiliary serial
interfaces.
If you need to install an ID-NET™ network refer to the DS2400N Reference
Manual.
The scanner can also be configured by reading programming barcodes. See the
ID-NET™ Setup Procedure Using Programming Barcodes printable from the
CD-ROM.
• If you need to install a Pass-Through network refer to the DS2400N Reference
Manual.
• If you need to install a Multiplexer network refer to the DS2400N Reference
Manual.
• If you need to install an RS232 Master/Slave (for backward compatibility) refer
to the DS2400N Reference Manual.
15

Datalogic DS2400N Specifications

General

Type	-
Sensor type	Laser
Read rate (max)	1000 reads/s
Linear (1D) barcodes supported	Codabar, Code 128, Code 39, Code 93, GS1-128 (UCC/EAN-128), Pharmacode, U.P.C.
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	RS-232, RS-485
Connectivity technology	Wired
Input voltage	10 - 30 V
Power source type	DC
Power consumption (typical)	5 W
Certification	IEC
Product color	Blue, Yellow
Housing material	Aluminum
International Protection (IP) code	IP65
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	0 - 90 %

Weight and Dimensions

Depth	34 mm
Width	84 mm
Height	68 mm
Weight	330 g